This procedure is intended to make the installation of broadsize cannon in wooden tall ship kits as enjoyable as possible.
DSC02983.JPGDSC02984.JPGDSC02985.JPGDSC02986.JPG DSC02992.JPG DSC02993.JPGDSC02994.JPGDSC02996.JPGDSC02998.JPG
Previous pageNext page Drilling the wire hole...
Drilling the wire hole...  ·  Our next operation is to drill a very small hole to accommodate a 1/2mm soft wire. I used a 1mm drill to allow easy entry of the wire. Drill this in the center. It won't interfere with the later drilling of a much larger hole to accommodate the stud of the cannon.
Procedure by Don M. Evans